How to Replace Wiper Blades 2017-2024 GMC Acadia, by TRQ on YouTube. 2 min 8 s.
- Video length
- 2 min 8 s
- Time to do it
- 10 minutes
- Difficulty
- Easy
- Steps
- 8
What you need
Steps
Park on level ground, turn the engine off and set the parking brake. Leave the wipers sitting in their normal rest position at the base of the windshield.
Put on gloves and safety glasses. Lay a folded towel on the glass under the arm you are working on, so a snapped arm cannot crack the windshield.
Lift the first wiper arm up and away from the glass until it stands on its own. Check that it holds before you let go.
Press the release tab on the old blade's connector and slide the blade down along the arm to unhook it. Keep the arm upright.
Compare the new blade with the old one to confirm the length and connector type match. The driver side blade is usually the longer of the two.
Slide the new blade onto the hook until it clicks into place, then tug it gently to make sure it is locked on.
Lower the arm slowly back onto the glass. Never let it drop, since the bare metal can chip or crack the windshield.
Repeat the same steps on the other wiper arm, then run the washers and check the sweep for streaks or missed spots.
Tips and common mistakes
Replace both blades at the same time, and plan on a new set every 6 to 12 months or as soon as they skip or streak.
Do the job with the ignition off so the wipers cannot start moving while your hands are near the arms.
If the new blade chatters, check that the connector is fully seated before blaming the rubber.
Buy blades by your Acadia's model year and trim, since lengths can vary between build years.
Questions
How often should I change wiper blades on a GMC Acadia?
Every 6 to 12 months, or sooner if you see streaking, skipping, splitting or hear squeaking. Hot sun and ice speed up the wear.
What size wiper blades does a 2017-2024 Acadia take?
Lengths vary by model year and trim, so check the fitment guide at the parts counter or in your owner's manual. Compare the new blade to the old one before fitting.
Do I need any tools?
No tools are needed for the front blades on this vehicle. Gloves, safety glasses and a towel to protect the glass are enough.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
