How to Replace Windshield Wiper Blades 2025 Kia K4, by David in France on YouTube. 1 min 50 s.
- Video length
- 1 min 50 s
- Time to do it
- 10 minutes
- Difficulty
- Easy
- Steps
- 8
What you need
Steps
Park the car and turn the ignition off. Pull the wiper stalk or use the service position so the arms sit up away from the hood, if your K4 offers it.
Lay a towel on the windshield under the arm. If an arm snaps back, the glass cracks, and the towel softens the blow.
Lift the driver side arm until it stands upright on its hinge. Do one side at a time so you never mix up the lengths.
Find the small plastic tab where the blade meets the arm. Press it in firmly with your thumb.
While holding the tab, slide the blade down and away from the arm hook. It should release without force.
Line up the new blade with the arm and push it on until you hear or feel a click. Tug it gently to confirm it is locked.
Lower the arm slowly onto the glass by hand. Never let it drop. Repeat the same steps on the passenger side.
Spray the windshield and run the wipers on low speed. Check for streaks, chatter or missed patches, then wipe the blades clean.
Tips and common mistakes
Replace both front blades at the same time, even if only one looks worn.
Note which blade came off which side, since driver and passenger lengths often differ.
Clean the glass with glass cleaner first so new blades do not pick up grit.
Avoid running the wipers on a dry windshield, which wears the rubber edge fast.
Questions
How often should I change wiper blades on a Kia K4?
Most makers suggest new blades every 6 to 12 months. Change them sooner if you see streaks, skipping or a chattering noise.
How do I know which blade size to buy?
Check the owner's manual or the parts listing for your 2025 Kia K4. Driver and passenger blades are usually different lengths.
Can I damage the windshield doing this?
Only if the bare metal arm falls onto the glass. Keep one hand on the arm at all times and work with the towel underneath.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
