How to Replace Front & Rear Wipers on a Toyota RAV4 (2019–2025), by 2doordude on YouTube. 4 min 28 s.
- Video length
- 4 min 28 s
- Time to do it
- 15 minutes
- Difficulty
- Easy
- Steps
- 7
What you need
Steps
Park on level ground and turn the ignition off. Lift the front wiper arms away from the windscreen so the blades stand up.
Lay a cloth on the glass under the arm. Press the release tab on the old blade connector and slide the blade off the hook.
Fit the new 26 inch blade on the driver side. Slide the hook into the connector until it clicks, then lower the arm gently.
Repeat on the passenger side with the 16 inch blade. Check both blades sit flat against the glass.
Lift the rear wiper arm off the back window. Release the old 12 inch blade from its arm.
Clip the new 12 inch rear blade onto the arm until it locks. Lower the arm back onto the glass.
Run the front and rear wipers with washer fluid and check for streaks or missed patches.
Tips and common mistakes
Match the blade length to the position, since a 26 inch blade will not fit the passenger side.
Hold the wiper arm while you work so it does not snap back and crack the windscreen.
Replace blades when they chatter or smear, usually once a year.
Check the connector type on your new blade matches the RAV4 hook arm before buying.
Questions
What size wipers does a 2019 to 2025 RAV4 take?
The driver side uses a 26 inch blade, the passenger side a 16 inch blade and the rear a 12 inch blade.
Do these blades fit hybrid and Prime models?
Yes. The same sizes fit the gas, hybrid and plug-in hybrid RAV4 across all trims from 2019 to 2025.
How often should I change RAV4 wiper blades?
About once a year, or sooner if they streak, chatter or leave gaps on the glass.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
