How to Winterize Your Robot Lawn Mower (Step-by-Step Winter Storage Guide), by Waypoint Lawn on YouTube. 13 min 6 s.
- Video length
- 13 min 6 s
- Time to do it
- 45 minutes
- Difficulty
- Easy
- Steps
- 7
What you need
Steps
Charge the mower battery to a good level before you store it. A partly charged battery holds up better over winter than a flat one.
Turn the mower off and lift it off the lawn. Remove the cutting disc if your model allows it so you can clean underneath.
Brush off grass clippings, soil and leaves from the body, wheels and underside. Wipe the shell with a damp cloth and let it dry fully.
Check the blades for nicks and wear. Unscrew the old blades and fit new ones if they are blunt or chipped.
Reinstall the cutting disc and tighten the screws firmly. Make sure the blades spin freely and nothing rubs.
Treat rubber seals and plastic parts with a suitable protectant so they do not dry out or crack over winter.
Store the mower indoors in a dry, frost-free place. Keep the charging station dry and unplug it if you are not using it.
Tips and common mistakes
Do not leave the battery fully drained for months, as it may not recover in spring.
Clean the underside properly, because wet grass stuck there can cause rust and smells.
Keep the mower away from damp sheds and standing water during storage.
Check the manual for your model, since battery and storage advice can differ between brands.
Questions
Should I leave the robot mower on its charging station all winter?
Most makers advise storing it indoors with a partial charge rather than leaving it on the dock for months. Check your model's manual for the exact recommendation.
Do I need to remove the battery?
On many robot mowers the battery is built in and should stay put. Only remove it if your manual says to, and store it in a dry place.
Can I use the same steps for other robot mower brands?
Yes, the cleaning, blade check and dry storage steps apply to most robot mowers. Battery and charging details may vary, so check your own manual.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
