How to Use: Bmani T16 Wireless Earbuds | Setup and Features, by Flicky Facts on YouTube. 4 min 3 s.
- Video length
- 4 min 3 s
- Time to do it
- 10 minutes
- Difficulty
- Easy
- Steps
- 8
What you need
Steps
Charge the case with the Type-C cable until the LED display shows a full charge. Put both earbuds in the case to charge them too.
Take both earbuds out of the case at the same time. They pair with each other automatically, which is the TWS pairing step.
On your phone or laptop, open Bluetooth settings and turn Bluetooth on. Keep the earbuds within about 10 meters of the device.
Look for Bmani T16 in the list of available devices and tap or click it to connect. Wait for the connected message.
Use the multifunction button on each earbud for playback and calls. A short press plays or pauses and answers calls.
To use one earbud only, leave the other in the case. Mono mode lets a single earbud play music and take calls.
If the earbuds will not connect, put both in the case, then multi-press the button to run the reset. Pair them again from your device.
Check the LED display on the case to see the battery level. Charge the case when the display shows low power.
Tips and common mistakes
Pair only one device at a time, since the earbuds usually connect to the last device they were paired with.
If sound goes to the phone speaker, disconnect and reconnect the earbuds in Bluetooth settings.
Keep the earbuds out of water and wipe them dry before putting them back in the case.
Questions
Why do my Bmani T16 earbuds not show up in Bluetooth?
Make sure both earbuds are out of the case and charged, then turn Bluetooth off and on again on your device. If they still do not appear, run the reset and pair again.
Can I use one earbud at a time?
Yes. Mono mode lets you use a single earbud for music and calls while the other stays in the case.
How do I fix one earbud that stopped working?
Put both earbuds in the case and do the multi-press reset, then pair them with your device again. Check that the case is charged first.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
