Sony WH-CH520 Headphones: How to Connect to PC, Laptop, Computer (via BluetootH), by WorldofTech on YouTube. 2 min 32 s.
- Video length
- 2 min 32 s
- Time to do it
- 5 minutes
- Difficulty
- Easy
- Steps
- 8
What you need
Steps
Charge the headphones first, then turn them on by holding the power button until the indicator lights up.
Put the headphones in pairing mode: press and hold the power button for about 5 seconds until the light flashes blue quickly.
On your PC, open Start, then Settings, then Bluetooth and devices. On Windows 10 it is Settings, then Devices.
Turn the Bluetooth switch on if it is off, then click Add device and choose Bluetooth.
Wait while Windows scans, then click WH-CH520 in the list of found devices.
Click Connect or Pair, and confirm any prompt that appears on screen.
Click the speaker icon in the taskbar, open the sound menu and pick WH-CH520 as the output device.
Play a song or video to test the sound, and adjust the volume on both the PC and the headphones.
Tips and common mistakes
If the headphones do not appear, turn Bluetooth off and on again on the PC and repeat the scan.
Turn off Bluetooth on your phone first, since the headphones may stay connected to it instead.
Keep the headphones within a metre of the PC while pairing to avoid a weak signal.
If pairing keeps failing, reset the headphones by holding the power and volume buttons together, then pair again.
Questions
Why can't my computer find the headphones?
The headphones are probably not in pairing mode. Hold the power button for about 5 seconds until the light flashes blue quickly, then scan again on the PC.
How do I know the pairing worked?
The headphones appear as WH-CH520 under your paired devices in Settings, and the light on them flashes blue slowly instead of quickly.
Do I need to pair again every time?
No. Once paired, just turn the headphones on with Bluetooth enabled on the PC and they reconnect on their own.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
