Epson EcoTank ET-1910 / ET-1913 Wireless Setup Step-by-Step, by PrintSmart Help on YouTube. 4 min 30 s.
- Video length
- 4 min 30 s
- Time to do it
- 15 minutes
- Difficulty
- Easy
- Steps
- 9
What you need
Steps
Turn the printer on and check that the Wi-Fi light is not already solid. Place the printer within range of your router before you start.
On your phone, open the app store and install Epson Smart Panel. Open the app and allow the permissions it asks for.
In Smart Panel, tap the add printer option and choose your ET-1910 or ET-1913 from the list. Follow the on-screen prompts.
Pick your 2.4 GHz Wi-Fi network and type the password. If your router shows one combined name, connect to the 2.4 GHz band instead.
Wait while the app sends the settings to the printer. When the Wi-Fi light stays on, tap finish to complete the mobile setup.
On a Windows PC or Mac, download the Epson installer for your model from the Epson website and run it.
Choose wireless connection in the installer and let it find the printer on your network. Select the printer when it appears.
If the installer cannot find the printer, connect a USB cable when prompted, finish setup, then switch to wireless in the installer.
Print a test page from the installer or from your phone to confirm the connection works.
Tips and common mistakes
The ET-1910 and ET-1913 only work on 2.4 GHz Wi-Fi, so a 5 GHz-only network will not connect.
Keep the phone or computer close to the printer during setup so the signal handoff does not fail.
If setup stalls, restart the router and the printer, then run the app or installer again.
Write down the Wi-Fi password before you start so you do not have to look it up mid-setup.
Questions
Why does my printer not see my Wi-Fi network?
The printer only supports 2.4 GHz. If your router uses one combined name, split the bands or connect to the 2.4 GHz network in the app.
Can I set it up without a phone?
Yes. Use the Epson installer on a Windows PC or Mac, or a USB cable first and then switch to wireless.
Do I need to reinstall the app to change networks?
No. Open Epson Smart Panel, select the printer and use the network settings to enter the new Wi-Fi name and password.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
