How to make a Spider-Man fabric face mask from a template

Make a Spider-Man style fabric mask using a printed paper template, felt or cotton fabric, and a little hand sewing. It suits beginners who can do basic cutting and running stitches. You need a printer for the template, fabric, elastic and a needle and thread.

Spiderman Brand New Day Mask DIY 🕷️, by Neha Pandey on YouTube. 8 min 23 s.

Video length
8 min 23 s
Time to do it
1 hour
Difficulty
Easy
Steps
9

What you need

Steps

  1. Print the mask template from the video description at 100 percent scale so the size stays correct. Cut out the paper pieces along the solid lines.

  2. Pin the paper pieces to your red fabric and cut around them, adding a 1 cm seam allowance. Cut two layers if you want a lined mask.

  3. Cut the black web lines or eye shapes from black fabric using the smaller template pieces. Lay them on the red mask front to check the placement.

  4. Sew or glue the black pieces onto the mask front. Hand running stitches or a small zigzag on a machine both work.

  5. Place the two mask layers right sides together and sew around the edge, leaving a 5 cm gap at the bottom for turning.

  6. Turn the mask right side out through the gap and press it flat with an iron on a low setting.

  7. Fold the gap edges inward and sew them closed with a small hidden stitch.

  8. Measure elastic around your head, cut it to length, and sew the ends to the left and right edges of the mask.

  9. Try the mask on and adjust the elastic or trim any loose threads before wearing it.

Tips and common mistakes

Wash and dry new fabric before cutting so it does not shrink after sewing.

Use sharp fabric scissors and cut slowly around curves to keep the mask shape clean.

Keep pins away from the needle path and remove them as you sew to avoid bending the needle.

This is a costume mask, not medical protection, so do not rely on it for filtering.

Questions

What fabric works best for this mask?

Felt holds the shape well and does not fray, which makes it easy for beginners. Cotton is softer and breathable but needs seam finishing.

Can I make it without a sewing machine?

Yes. Simple running stitches and a hidden stitch to close the gap are enough. Fabric glue works for the black web details.

How do I get the right size?

Print the template at full scale and check the printed size guide with a ruler. Resize on the printer settings before cutting fabric.

This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.

More in Crafts & Sewing

See all