Professional Pant Hem by Hand | Step-by-Step Guide. #fashiontips #sewing #lifehacktips #styletips, by Fashion fit tips on YouTube. 1 min 41 s.
- Video length
- 1 min 41 s
- Time to do it
- 45 minutes
- Difficulty
- Easy
- Steps
- 9
What you need
Steps
Put the trousers on with the shoes you will wear with them. Pin the hem at the length you want, then take them off and lay them flat.
Measure from the floor to the pinned fold on both legs. Make sure both sides match, then mark the new length with chalk.
Cut the old hem off, leaving about 4 cm (1.5 inches) of fabric below your chalk line for the new hem allowance.
Fold the raw edge under by about 1 cm and press it flat with a hot iron. Then fold again along your chalk line and press.
Pin the folded hem in place all the way around, keeping the pins parallel to the fold.
Thread your needle and knot the end. Bring the needle up through the fold, catching only a few threads of the trouser fabric.
Take a small stitch in the hem fabric, then slide the needle back inside the fold. Repeat this blind stitch every 1 cm around the leg.
Pull the thread gently as you go so the stitches stay hidden and the hem does not pucker.
Finish with a couple of small stitches and knot the thread inside the hem. Press the hem again through a damp cloth.
Tips and common mistakes
Use thread that matches the trouser fabric, not the hem, so the stitches disappear.
Keep stitches small and loose; tight stitches make the hem pull and show on the outside.
Press the fold before sewing so the hem holds its shape without pins.
Check the length while wearing your usual shoes, since heel height changes the hem line.
Questions
Can I hem trousers without a sewing machine?
Yes. A hand blind stitch gives a clean, almost invisible hem and is actually better for delicate or stretch fabrics.
How much fabric should I leave for the hem?
About 4 cm (1.5 inches) is enough for most trousers. Thicker fabrics like wool need a little more so the fold sits flat.
Do I need special thread?
Regular polyester or cotton thread works. Match the colour closely to the trousers and use a thin needle for light fabrics.
This guide was drafted from the video's details and general task knowledge. It has not been checked against the full video. Check the video and relevant product instructions before following a procedure. Report a correction.
